System Management
7450 ESS OS Basic System Configuration Guide Page 395
boot-timer
Syntax boot-timer seconds
no boot-timer
Context config>redundancy>bgp-multi-homing
Description This command configures the time the service manger waits after a node reboot before running the DF
election algorithm. The boot-timer value should be configured to allow for the BGP sessions to come up and
for the NLRI information to be refreshed/exchanged.
The no form of the command reverts the default.
Default no boot-timer
Parameters seconds — Specifies the BGP multi-homing boot-timer in seconds.
Values 1 — 100
To Next Page
Loading...
