Page 396 7450 ESS OS Basic System Configuration Guide
site-activation-timer
Syntax site-activation-timer seconds
no site-activation-timer
Context config>redundancy>bgp-multi-homing
Description This command defines the amount of time the service manager will keep the local sites in standby status,
waiting for BGP updates from remote PEs before running the DF election algorithm to decide whether the
site should be unblocked. The timer is started when one of the following events occurs if the site is
operationally up:
• Manual site activation using the no shutdown command at site-id level or at member object(s) level
(SAP(s) or PW(s))
• Site activation after a failure
Default no site-activation-timer
Parameters seconds — Specifies the standby status in seconds.
Values 1 — 100
Default 2
To Next Page
Loading...
