Alcatel-Lucent 7450 ESS-12 - Page 494

Page 456 7450 ESS OS Basic System Configuration Guide
Packets Tx Keepalive : 52519
Packets Tx Config : 2
Packets Tx Peer Config : 54
Packets Tx State : 8
Packets Tx Failed : 0
===============================================================================
A:subscr_mgt#
B:Dut-B# show redundancy multi-chassis mc-lag peer 10.10.10.2 statistics
===============================================================================
Multi-Chassis Statistics, Peer 10.10.10.2
===============================================================================
Packets Rx : 231
Packets Rx Keepalive : 216
Packets Rx Config : 1
Packets Rx Peer Config : 2
Packets Rx State : 12
Packets Dropped State Disabled : 0
Packets Dropped Packets Too Short : 0
Packets Dropped Tlv Invalid Size : 0
Packets Dropped Tlv Invalid LagId : 0
Packets Dropped Out of Seq : 0
Packets Dropped Unknown Tlv : 0
Packets Dropped MD5 : 0
Packets Tx : 235
Packets Tx Keepalive : 216
Packets Tx Peer Config : 3
Packets Tx Failed : 0
===============================================================================
B:Dut-B#
mc-ring
Syntax mc-ring peer ip-address statistics
mc-ring peer ip-address [ring sync-tag [detail|statistics] ]
mc-ring peer ip-address ring sync-tag ring-node [ring-node-name [detail|statistics] ]
mc-ring global-statistics
Context show>redundancy>multi-chassis
Description This command displays multi-chassis ring information.
Parameters ip-address — Specifies the address of the multi-chassis peer to display.
ring sync-tag — Specifies a synchronization tag to be displayed that was used while synchronizing this port
with the multi-chassis peer.
node ring-node-name — Specifies a ring-node name.
global-statistics — Displays global statistics for the multi-chassis ring.
detail — Displays detailed peer information for the multi-chassis ring.
Output Show mc-ring peer ip-address ring Output — The following table describes mc-ring peer ip-address
ring output fields.