Show Commands
7450 ESS OS Basic System Configuration Guide Page 457
Sample Output
*A:ALA-48>show>redundancy>multi-chassis# mc-ring peer 10.0.0.2 ring ring11 detail
==============================================================================
Multi-Chassis MC-Ring Detailed Information
==============================================================================
Peer : 10.0.0.2
Sync Tag : ring11
Port ID : 1/1/3
Admin State : inService
Oper State : connected
Admin Change : 01/07/2008 21:40:07
Oper Change : 01/07/2008 21:40:24
Failure Reason : None
------------------------------------------------------------------------------
Label Description
Sync Tag
Displays the synchronization tag that was used while synchronizing this port
with the multi-chassis peer.
Oper State
noPeer — The peer has no corresponding ring configured.
connected — The inband control connection with the peer is operational.
broken — The inband control connection with the peer has timed out.
conflict — The inband control connection with the peer has timed out
but the physical connection is still OK; the failure of the inband signaling con-
nection is caused by a misconfiguration. For example, a conflict between the
configuration of this system and its peer, or a misconfiguration on one of the
ring access node systems.
testingRing — The inband control connection with the peer is being set
up. Waiting for result.
waitingForPeer — Verifying if this ring is configured on the peer.
configErr — The ring is administratively up, but a configuration error
prevents it from operating properly.
halfBroken — The inband control connection indicates that the ring is
broken in one direction (towards the peer).
localBroken — The inband control connection with the peer is known to
be broken due to local failure or local administrive action.
shutdown — The ring is shutdown.
Failure Rea-
son
Displays the reason of the failure of the operational state of a MC ring.
No. of MC
Ring entries
Displays the number of MC ring entries.
To Next Page
Loading...
