Alcatel-Lucent 7450 ESS-12 - Page 505

Show Commands
7450 ESS OS Basic System Configuration Guide Page 467
Sample Output
*A:subscr_mgt_2# show redundancy multi-chassis sync peer 10.10.10.20 detail
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.20
Description : Mc-Lag peer 10.10.10.20
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications : SUBMGMT
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 1
Rem Lcl Deleted Entries : 0
Source IP Address
Displays the source address used to communicate with the multi-chassis peer.
Admin State
Displays the administrative state of the peer.
Client Applica-
tions
Displays the list of client applications synchronized between routers.
Sync Admin State
Displays the administrative state of the synchronization.
Sync Oper State
Displays the operation state of the synchronization.
DB Sync State
Displays the database state of the synchronization.
Num Entries
Displays the number of entries on local router.
Lcl Deleted
Entries
Displays the number of deleted entries made at the local router.
Alarm Entries
Displays the alarm entries on the local router.
Rem Num Entries
Displays the number of entries on the remote router.
Rem Lcl Deleted
Entries
Displays the number of locally deleting entries made by the remote router.
Rem Alarm Entries
Displays alarm entries on the remote router.
Table 32: Show Redundancy Multi-chassis Sync Peer Detail Output Fields (Continued)
Label Description