Alcatel-Lucent 7450 ESS-12 - Page 529

Show Commands
7450 ESS OS Basic System Configuration Guide Page 491
Syntax system sync-if-timing {ref1 | ref2 | bits}
Context clear
Description This command allows an operator to individually clear (re-enable) a previously failed reference. As long as
the reference is one of the valid options, this command is always executed. An inherent behavior enables the
revertive mode which causes a re-evaluation of all available references.
sync-if-timing
Syntax system sync-if-timing {ref1 | ref2}
Context clear
Description This command allows an operator to individually clear (re-enable) a previously failed reference. As long as
the reference is one of the valid options, this command is always executed. An inherent behavior enables the
revertive mode which causes a re-evaluation of all available references.
Parameters ref1 — clears the first timing reference
ref2 — clears the second timing reference
trace
Syntax trace log
Context clear
Description This command allows an operator to clear the trace log.