Alcatel-Lucent 8038 - Guarantee and Clauses; Safety Instructions

48
10 Guarantee and clauses
10.1 Safety Instructions
 Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
 Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a
safe distance between your pacemaker or implant defibrillator and the handset which includes
magnetic elements: 4 centimeters (1,6 inches) at least
 To limit the risk of interference, people with pacemakers must keep the wireless telephone away
from their equipment (minimum distance of 15 cm/6 inches)
 It is recommended to follow the standard acceptance procedures before using this equipment in
human safety critical areas (hospitals...).
 The handset includes magnetic elements that may attract sharp metallic objects. To prevent
injury, before each use ensure sharp metallic objects are not stuck to the earpiece and
microphone.
 There is a danger of explosion if the battery is replaced incorrectly - use only the battery with the
reference 3GV28041AB (1.2V 1500 mAh) (Bluetooth® Handset only).
 Battery charge (Bluetooth® Handset only): Charge the battery for about 16 hours before initial
use
 Avoid using phones (other than cordless) during an electrical storm. There may be a remote risk of
electric shock from lightning
 Do not use the device in environments where there is a danger of explosion
 Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a
regular Public Switched Telephone Network (PSTN) connection. This can result in severe damage
to the phone
 Never allow your telephone to come into contact with water
 To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone,
etc.) which may damage the plastic parts of your telephone. Do not use aerosol cleaners.
 This product is intended to be connected to the PABX via the LAN (10/100/1000 MB)
 If you are connected to a POE connection do not use an external Power Supply.
 The PoE (Power over Ethernet) devices that supply or receive power and their connected cables
must all be completely indoors.
 The RJ-45 jack is not used for telephone line connection
 The 8068 also offers a Bluetooth® Radio Interface for the Bluetooth® handset or other Bluetooth®
devices -frequency range 2402-2480 MHz, Radiated Power 1mW.