EasyManua.ls Logo

Alcatel-Lucent 8039s - Activating;Deactivating Forced Headset Mode; Install a Jack Accessory (Headset, Hands-Free, Loudspeaker)

Alcatel-Lucent 8039s
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Digital Phone
8AL90353USABed01
52 /73
To cancel your reminder request:
Reach the 'Menu' page.
Appointment
Temporary/ Permanent Select the type of appointment (temporary or permanent).
Clear
The 'Appointment programmed' icon disappears from the welcome page.
7.12 Install a jack accessory (headset, hands-free, loudspeaker)
By default, the audio jack of your telephone can be used to connect a headset, hands-free kit or
loudspeaker. A wideband headset can also be installed for optimized sound quality.
When you plug the jack accessory in the jack, a popup asks you for the type of accessory:
Headset
Handsfree
A specific icon is displayed in the status bar: .
If necessary, you can also select the accessory type in the audio settings:
Reach the 'Menu' page.
Settings Phone Jack
Headset / Handsfree Select the type of device plugged into the jack.
Your phone is equipped with a 3.5 mm, 4 pole jack. If your device is not compatible, you can use a 3
pole to 4 pole jack adapter.
Your phone is equipped with a 3.5 mm, 4 pole jack. If your device is not compatible, you can use a 3
pole to 4 pole jack adapter.
7.13 Activating/Deactivating 'Forced headset' mode
Forced headset mode must be activated as soon as a headset is installed instead of the handset.
Reach the 'Menu' page.
Settings Phone ForcedHead
ON/OFF activating/deactivating forced headset.

Table of Contents

Related product manuals