1.11.1 Install the add-on to the deskphone
Premium Add-on 10 keys
o Remove the protection of the dedicated compartment behind the set.
o Insert the add-on correctly in the compartment.
o Plug the provided cord into the dedicated sockets behind your set and the add-on (2: ).
o Fix the add-on with the provided screw.
o Restart the deskphone (unplug and plug in the power jack if you are using an external
power adapter or the Ethernet connector – LAN).
Premium Add-on 40 keys / Premium Smart Display 14 keys:
o Plug the provided cord into the dedicated socket behind your phone and behind the add-
on ( ).
o If desired, fix the foots (set and add-on) with the provided clip.
o Restart the deskphone (unplug and plug in the power jack if you are using an external
power adapter or the Ethernet connector – LAN).
Manage and use the add-on keys as a direct call key. See chapter: Programming your telephone.
1.11.2 Install more than one add-on module
It is possible to connect up to three add-on modules (Premium Smart Display 14 keys, Premium Add-on
40 keys). To attach another add-on, affix and connect the new add-on to the one that is already
connected:
o The first add-on is connected to the deskphone.
o Plug the provided cord of the new add-on into the dedicated
socket behind the connected add-on ( ).
o Plug the other end of the cord into the dedicated socket
behind the new add-on ( ).
o Restart the deskphone (unplug and plug in the power jack if
you are using an external power adapter or the Ethernet
connector – LAN).
To Next Page
Loading...
