7.6.4 Set the delay before the brightness is lowered when the phone is not used
(screensaver)
or (long press) Display Screensaver
Set the time delay (default 4 hours).
7.7 Selecting the welcome page
This function is used to choose the page displayed by default on the telephone.
Settings Phone Homepage
Select the default page (Menu, Perso, Info, Last page seen…).
7.8 Selecting language
Reach the 'Menu' page.
Settings Phone Language
Select the language of your choice.
7.9 Programming keys for call numbers and functions (Perso page/F1 and
F2 keys/add-on keys)
Depending on your deskphone, you can program:
Softkeys of the Perso page.
Keys/softkeys of the add-on module.
F1 and F2 keys.
Programmable keys with LED and paper.
Programmable keys with LED and paper.
Led behavior may differ depending on the system configuration. For more information,
contact your installer or administrator.
If the key is not programmed yet:
Select the key to program.
Use one of the following:
o Speed dial To program a number.
o My services To program a function.
If the key is already programmed:
(or Settings Phone Key program Prog perso page)
Select the key to program.
Use one of the following:
o Speed dial To program a number.
o My services To program a function.
To Next Page
Loading...
