10 Use the telephone in SIP or 'Safe '
mode
Your telephone is compliant with the SIP standard and can be used in simplified mode in a SIP
environment.
According to the configuration the telephone system of your company, your phone set can automatically
switch to 'safe ' mode in case of loss of connection with the system, in order to ensure continuity of
service. Then, your telephone is running in SIP mode until the connection with the telephone system of
your company is re-established.
In SIP mode, each telephone is identified by a character string called the URI. Within your company, the
URI of your caller is usually the caller's telephone number.
For more information, contact your installer or administrator.
The SIP mode is only available for 8 Series.
Pre-programmed function keys are disabled in SIP mode.
10.1 Making a call
10.1.1 Take the line
Use one of the following:
Lift the receiver Enter the destination number.
Hands free Dial the destination number.
Line key Dial the destination number.
You hear a tone.
10.1.2 Call by dialing internal number of your caller
Use one of the following:
Dial directly the number for your call.
Take the line Dial the destination number Call
10.1.3 Call using your caller's URI
Take the line.
Dial by URI
Enter your caller's URI.
/ Call
In SIP mode, each telephone is identified by a character string called the URI. Within your company, the
URI of your caller is usually the caller's telephone number.
10.2 Make a call using the personal phone book
Use one of the following:
o Directory
o Take the line From directory
Select your caller from the list.
Call
10.3 Redialing the last number dialed
To Next Page
Loading...
