2 Using your telephone
2.1 Making a call
Use one of the following:
Dial directly the number for your call.
Lift the receiver Enter the destination number.
Press the on-hook/off-hook key of the Bluetooth® device (Bluetooth® Wireless handset)
Dial the destination number.
Hands free Dial the destination number.
Programmed line key.
Dial by name (enter the first letters of the contact's name on the alphapad and press OK to start
the search).
Redial last number.
To make an external call, dial the outside line access code before dialing your contact number.
If the internal or outside number does not reply:
LS announce Broadcast a message on the loudspeaker of the free terminal.
Call back Request callback to a busy terminal.
Text mail Send a written message.
Voice mail Store number to call again.
2.2 Receiving a call
Use one of the following:
Lift the receiver to take the call.
/ / Press the 'take the call', 'loudspeaker' or 'line key' key to take the call in
handsfree mode.
Press the On-Hook/Off-Hook key on the Bluetooth handset to take the call (if handset is not
on-hooked) - Bluetooth® Wireless handset.
Select the incoming call icon. With the touchscreen, selecting the icon displays
information about the incoming call, you can touch near the icon (external free area) to answer
the displayed call directly.
Take call
2.3 Using the telephone in 'Hands free' mode
2.3.1 Terminal idle:
Press and release You are in hands free mode.
Terminate your call.
To Next Page
Loading...
