Change the configuration
You have to change a parameter of the VPN configuration.
Restart the deskphone (unplug and plug in the power jack if you are using an external power
adapter or the Ethernet connector – LAN).
When the deskphone displays the 'Step 2' during the boot, repeatedly press the '*' and '#' keys in
succession until a menu is displayed.
VPN (Scroll down the menu).
Select a submenu to change the configuration (VPN Config, VPN Tftp, VPN Auth, VPN Pincod).
Enter your PIN code (if an administrator password is defined by the system, you can use it to
access to the VPN configuration by selecting: Use Password).
Validate.
Change parameters.
Select this icon to save parameters.
The VPN configuration is saved and the main menu is displayed.
select this icon to exit the configuration menu. The deskphone restarts.
Enter the PIN code if you have selected the option (Request Pin on Boot).
Validate.
Your deskphone is ready for teleworking.
PIN code
The PIN code is composed of 4 digits. You can access the VPN configuration by entering the PIN code
or the administrator password if defined by the system. Depending on the VPN configuration, the PIN
code is requested when you boot your deskphone. We recommend you enable this option for security
reasons and if you need your phone in remote and in business place (See Reconnect your deskphone in
your business place).
If the PIN code is incorrect 5 times in succession, the PIN code and VPN parameters will be erased.
If no administrator password is defined by the system, the PIN code is required to access VPN
configuration.
Reset your PIN code
Restart the deskphone (unplug and plug in the power jack if you are using an external power
adapter or the Ethernet connector – LAN).
When the deskphone displays the 'Step 2' during the boot, repeatedly press the '*' and '#' keys in
succession until a menu is displayed.
VPN (Scroll down the menu).
VPN Pincod
Enter your PIN code.
Validate.
Set new Pincode: enter the new PIN Code.
Select this icon to save parameters.
The VPN configuration is saved and the main menu is displayed.
select this icon to exit the configuration menu. The deskphone restarts.
Enter the PIN code if you have selected the option (Request Pin on Boot).
To Next Page
Loading...
