Maintenance Manual –
8242 DECT Handset
8AL 90310 USAA Ed01 8 /18
2.2.4 HS Logs
The HS log is a debugging feature that allows Admin to retrieve low level interesting messages from the
handset.
These are debug error logs retrieved from the PP log file. The last log
retrieved is formatted into:
Error: Log event error code. Valid value is 0000 to FFFF (in Hex).
Line: Location within the software code which triggered this error. Valid
value is 0000 to FFFF (in Hex).
Address: Register bank and/address from which error occurred. Valid value is
00000000 to FFFFFFFF (in Hex.)
Timestamp: Date and Time when the log error event occurred.
This reports of the function/exception handler that run after an erroneous
state in handset operation.
Next assert ID: Immediate exception handler ID to be run when a specific
error occurs. Valid value is 00 to FF (in Hex).
Assert address: Register bank and/address where an exception handler is
executed as a result of the error which occurred. Valid value is 00000000 to
FFFFFFFF (in Hex.)
Screenshots
To Next Page
Loading...
