Maintenance Manual –
8242 DECT Handset
8AL 90310 USAA Ed01 9 /18
2.2.5 Status
This provides the present condition of the handset and the base station to which the handset is locked
to.
Some of the information available in this mode are described in the table below (this information is
updated during location request update from the DECT system).
Software presently installed in the handset: SW version, branch, date and
time of the build (for e.g.: 67.80 Branch: 0005 14-04-2014 14:53).
Current hardware module used in the handset:
For e.g.:
V3R3 where V3 is the PCB Version and R3 is the Schematic version
D: 1.1 is the display driver used in the phone
Operating frequency of system. DECT band includes US, EU, SA, N/A
options.
Current handset battery energy level (in %).
Unique identifier of the handset
Current Rssi level of the handset
Current power level of the handset
Operating frequency area of the handset
This shows the current DECT mode the handset is configured to use.
The mode is automatically detected based on the carrier channel
and carrier offset and how it match the actual carrier frequency.
There are 3 modes:
INT, OTHERS or Unknown
Number of bytes currently not used by the handset
INT: This is either EU_DECT or MALAYSIA_DECT
OTHERS: This is either US_DECT, SA_DECT, TAIWAN_DECT, CHINA_DECT, THAILAND_DECT or
BRAZIL_DECT
Unknown: UNKNOWN_DECT_MODE
The different XX_DECT modes are:
China DECT is 10 frequencies from 1902.528 to 1918.080, normal output power.
SA (South America) DECT is 10 frequencies from 1911.168 to 1926.720, normal output power.
Taiwan DECT is 8 channels in the EU DECT, channel 2-9, normal output power.
Thailand DECT is 3 channels on the frequencies 1902.528, 1904.256 and 1905.984 MHz, normal output
power.
Malaysia DECT is 5 channels in the EU DECT band, channel 5-9, reduced output power, 20 dBm.
Brazil DECT is 5 channels on the frequencies 1911.168, 1912.896, 1914.624, 1916.352 and 1918.080 MHz,
normal output power.
To Next Page
Loading...
