Alcatel-Lucent IP Touch 4088 EE - Page 9

All Rights Reserved © Alcatel-Lucent 2009
Page 9
local_sips_port=
Enter the port number used by the SIP set used
in secured mode
sip_transport_mode=0
Enter level transport mode:
– 0 for UDP or TCP
– 1 for UDP only
– 2 for TCP only
local_rtp_port=42000
Leave the default value
local_rtcp_port=42001
Leave the default value
prack_type=0
Enter PRACK type :
- 0 = PRACK supported
- 1 = PRACK required
- 2 = PRACK disabled
preferred_vocoder=0,4,8,18
Enter the preferred voice coder:
– 0 for PCMU
– 8 for PCMA
– 4 for G723.1
– 18 for G729A
authentication_realm=
If no authentication, leave empty
authentication_name=
If no authentication, PUT A VALUE LIKE none
authentication_password=
If no authentication, leave empty
user_name=
Enter the name of the user
display_name=
Enter the name to be displayed on the set
voice_mail_uri=
Enter the URI or the call number of the voice
mail
message_waiting_indication_uri=
Complete SIP URI of the voice mail
[qos]
sip_diffserv=0
rtp_diffserv=0