4.1.1.2 Mounting in the 19" Rack
4.1.1.2.1 Recommendations
Before installing the system in a 19" rack, you must verify that:
- The maximum static load (given by the manufacturer) of the 19" rack is greater than the
overall weight of the equipment mounted or to be mounted in the rack.
- Moreover, the weight of the equipment must be evenly distributed between the brackets.
- If mounting the Alcatel-Lucent OmniPCX Office Communication Server platform results in
exceeding the load on the front supports (generally the total weight divided by two), the
platform must be placed on a fixed tray attached to the four supports of the rack.
Chapter
4
&'(
4-2