Set unregistered SIP phone unregistered from Alcatel-Lucent
OmniPCX Office Communication Server
SIP registration OK SIP phone connected and successfully re-
gistered to Alcatel-Lucent OmniPCX Office
Communication Server
Entering the SIP password through local MMI
For static and dynamic initialization, enter the SIP password through MMI.
4.4.3.1.3 Upgrading the software
The 4135 IP Conference Phone set software is automatically upgraded during OmniPCX
Office software upgrade (there is no specific option to select in the OMC-Software Download
window: refer to System Startup from OMC - Downloading the Software )
The 4135 IP Conference Phone set software can also be upgraded manually through the MMI.
4.4.4 Generic SIP Phones
4.4.4.1 Commissioning
4.4.4.1.1 Overview
This module presents all the actions required for commissioning generic SIP sets.
The List of supported SIP Phones is available on the Alcatel-Lucent Applications Partner
Program (AAPP) web site.
4.4.4.1.2 Commissioning Generic SIP Sets
This section describes how to commission a generic SIP Set.
The following operations must be performed:
1. Configure the user in OMC, refer to Configuring the User in OMC
2. Connect the set, refer to Connecting the Set and switch it on
3. Configure the generic SIP set, refer to Configuring the generic SIP set , or configure the
OmniPCX Office DHCP server, refer to Configuring OmniPCX Office DHCP server .
Prerequisites
- The Alcatel-Lucent OmniPCX Office Communication Server must be R810 or higher and
must be operational
- A free IP address must be available for the set
- A port with PoE must be available on a switch
Configuring the User in OMC
To create a generic SIP set:
1. In OMC, go to Users/Base stations List.
2. Select a No., IP access and click on the Add button.
&'(
4-55
To Next Page
Loading...
Need help?
General
