Using your telephone
12
2
• When you receive a call:
2.9
Redialling
Redialling the last number dialled (redial):
Call back on the last 10 number dialled :
2.10
Requesting automatic callback if internal number is busy
you hear the message left by
your caller
name or number of
the caller
hands free to take
the call
to stop listening only
Paul
is screened
OR OR
last number redial
'Redial'
key(short
press)
'Redial' key
(long press)
reach the 'Menu'
page
select the No. in the
last ten issued
call required number
OR
menu
10:30
Rediallist
Call
internal number busy callback request acknowledged
¤Callback
• Cancelling callback request:
2.11
Answering an internal call in intercom mode
You can answer without lifting the receiver. When you receive an internal call, your telephone rings and you are connected
directly in hands free mode. The screen shows the caller’s identity.
• To activate - Terminal idle:
• To deactivate - Terminal idle:
2.12
Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an automated attendant or a
remotely consulted answering machine.
cancellation of callback request
acknowledged
Automatic callback is not available if the set of your correspondent is free or if you are
put on hold when the set is busy.
×Callback
corresponding LED lights up
When your caller hangs up, intercom mode remains active.
The corresponding LED goes out
during a
conversation
to activate
The function is automatically cancelled when you hang up.
Paul
in conversation
¤MFcode
To Next Page
Loading...
Need help?
General
