Alcatel-Lucent OmniPCX Office User Manual

Keep in touch
23
6
6.6
Personal assistant : reaching you with one number only
6.7
Diverting calls to your pager
Callers will thus be able to contact you while you are moving around the company:
6.8
Forwarding your calls from the receiving terminal (“Follow me”)
You wish to receive your calls in your present location:
Use the “Follow me” function.
reach the 'Menu'
page
select type of
diversion
dial number of a
colleague or your
secretary
dial an outside line number dial number of your mobile
or DECT
activate/deactivate transfer
to operator
apply
menu
10:30
Settings
Assistant
Menu
InternalNr
ExternalNr
MobileNr
Operator
diversion is acknowledged
'forward to paging'
programmed key
Topaging
OR
your extension
number
Followme
2
6
5
3
ab c
def
jkl
m
n
o
6.9
Applying a selective diversion
You can selectively divert calls, according to the caller’s identity:
6.10
Diverting all group calls
You can divert all your group calls to another internal number:
6.11
Cancelling all diversions
6.12
Cancelling a specific diversion
diversion is acknowledged
'follow-me'
programmed key
your extension
number
OR
2
6
5
3
ab c
def
jkl
m
n
o
diversion is acknowledged
'selective
forwarding'
programmed key
diversion is acknowledged
'group calls
forwarding'
programmed key
number receiving
diversion
2
6
5
3
ab c
def
jkl
m
n
o
programme another type of
diversion
'cancel all forwarding'
programmed key
Cancelfwd.
OR
OR
programmed key corresponding to type of diversion
(group or selective)

Alcatel-Lucent OmniPCX Office Specifications

General

VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Humidity	10% to 90% non-condensing
Type	IP PBX
Maximum Trunks	Up to 60
Voice codecs	G.711, G.729
Network Interfaces	10/100 Ethernet
Weight	Varies depending on the model/configuration