Configuring Access Guardian Access Guardian Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-7
Access Guardian AAA Profile Defaults
An AAA profile defines and applies specific settings to UNP ports, link aggregates, or an Access
Guardian Captive Portal profile. The following table lists the default profile settings that are defined when
an AAA profile is created through the aaa profile command:
The RADIUS NAS-Identifier
attribute value
aaa radius nas-identifier System name
The MAC address format to use
when RADIUS client attributes
specify a MAC address value.
aaa radius mac-format No delimiter
Uppercase characters
Description Keyword Default
The RADIUS server
configuration for device
authentication.
device-authentication None
The RADIUS server or switch
logging configuration for
accounting sessions.
accounting None
The RADIUS Calling-Station-
Id attribute value
accounting radius calling-station-id User MAC address
The status of automatic 802.1X
re-authentication.
802.1x re-authentication Disabled
The amount of time between
interim accounting updates per
user session.
interim-interval 600 seconds
User session time limit. session-timeout Timer is disabled
The amount of time before an
inactive user is logged out of a
session.
inactivity-logout Timer is disabled
The RADIUS NAS-Port
attribute value
radius nas-port-id User port
(chassis/slot/port)
The RADIUS NAS-Identifier
attribute value
radius nas-identifier System name
The MAC address format to use
when RADIUS client attributes
specify a MAC address value.
radius mac-format No delimiter
Uppercase characters
Description Command Default
To Next Page
Loading...
