Configuring Application Monitoring and Enforcement AppMon Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 29-3
AppMon Defaults
Description Keyword Default
AppMon default global status app-mon admin-state Disabled
AppMon default status on the
physical port
app-mon port admin-state Disabled
AppMon L3 mode app-mon l3-mode Enabled for both
monitoring and
enforcement (both
Ipv4, Ipv6)
AppMon L4 mode app-mon l4-mode Enabled (both TCP
and UDP)
AppMon flow-table enforcement
statistics
app-mon flow-table enforcement stats Disabled
Flow table aging interval (only
Enforcement)
app-mon aging enforcement Application specific
Logging threshold app-mon logging-threshold 20000 flows
AppMon flow sync collection
interval (only Enforcement)
app-mon flow-sync enforcement interval 60 seconds
To Next Page
Loading...
