Configuring Learned Port Security Configuring Learned Port Security
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 33-18
To configure the security violation mode for multiple LPS ports, specify a range of ports or multiple slots.
For example:
-> port-security port 4/1-10 violation shutdown
-> port-security port 1/10-15 violation restrict
Note. To verify the details about LPS violations, use the show violation command.
-> show violation
Port Source Action Reason Timer
-------+----------+-------------------+----------------+--------
1/1 src lrn simulated down lps shutdown 0
1/2 qos simulated down policy 0
2 udld admin down udld 0
To clear all the LPS violation information use the interfaces fec command.
To Next Page
Loading...
