12
MANAGING PHONE LINES
SWITCHING BETWEEN LINES DURING MULTI-PARTY
CALLS
Talking privately with one individual
Press (Conference).
The line menu is displayed.
Press (Hold) .
All lines are put on hold.
Alternatively, you can select SPLIT CONFERENCE from the line menu to put the
lines on hold.
Mark a party in the line menu and press OK or (Hold) .
The party is reconnected to the call.
Switching to another caller
This assumes that you are talking with just one individual as described above.
Mark another party in the line menu and press (Hold) .
The rst party is put on hold and the other is connected to the call.
Talking to several parties
This assumes that you are talking with just one individual as described above.
Mark another party in the line menu and press OK.
Both the rst and the second party are connected to the call.
Talking to all parties
This assumes that you are talking with just one individual as described above.
Press (Conference).
All parties are connected to the call.
An alternative way to connect all lines to the call is to select MAKE CONFERENCE
in the line menu.
To Next Page
Loading...
