26
The OmniTouch 4135 IP has two groups of settings: Basic and Advanced. You must
enter the Admin. PIN code to access the advanced settings.
The simplest way to make settings is using a PC and the OmniTouch 4135 IP web
interface (see page 33).
BASIC SETTINGS
Selecting languages
Select MENU > SETTINGS > BASIC > LANGUAGE (6,1,1).
Select the language you want and press OK to conrm.
Deactivating keypad tones
You can select whether or not you want a tone to be heard when you press a button.
Note that this setting does not affect the tone you hear when you dial a number in call
mode.
Select MENU > SETTINGS > BASIC > KEY TONE (6,1,2).
Select your choice and press OK to conrm.
Adjusting ring level volume
Select MENU > SETTINGS > BASIC > RING LEVEL (6,1,3).
Select your choice and press OK to conrm.
There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone ashes when an
incoming call is received.
Adjusting sound (equalizer)
The sound reproduction can be adjusted to the required pitch (SOFT, NEUTRAL and
BRIGHT).
Select MENU > SETTINGS > BASIC > EQUALIZER (6,1,4).
Select your choice and press OK to conrm.
Settings when connecting external equipment (Aux)
The OmniTouch 4135 IP can be connected to a wireless headset or an external PA
system. An optional PA interface box is required for PA system connection.
Select MENU > SETTINGS > BASIC > AUX PORT (6,1,5).
Select the PA option to activate features for external microphone mixer and PA
system.
SETTINGS
To Next Page
Loading...
