Alcatel-Lucent OmniTouch 4135 IP - Using the Web Interface; Checking Network Addresses for Web Access

31
SETTINGS
CHECKING STATUS
The status menu can be used for troubleshooting. Only the administrator is able to
change these settings. See “Installation and Administration of OmniTouch 4135 IP” for
an explanation of the settings.
Account
To check account settings for the SIP account.

Select MENU > STATUS > ACCOUNTS > ACCOUNT (8,1,1).
This shows the status for:
- ACCOUNT NAME
- STATUS
- REGISTRAR
- SIP ID
- AUTH.NAME
- REALM
- PROXY
Transfer protocol
To check which protocol is used to transmit data packages over the network.

Select MENU > STATUS > ACCOUNTS > TRANSPORT (8,1,2).
Current protocol is displayed.
Network
To check which protocol is used to transmit data packages over the network.

Select MENU > STATUS > NETWORK (8,2).
This shows the status for:
- DHCP
- IP ADDRESS
- HOSTNAME
- DOMAIN
- NETWORK
- GATEWAY
- DNS 1
- DNS 2
- VLAN