Alcatel-Lucent OmniTouch 4135 IP - Using the Web Interface (Continued); Logging into the Web Interface

32
SETTINGS
NAT Traversal
To check whether address conversion is activated, which may be necessary if the phone
is behind a rewall.

Select MENU > STATUS > NAT TRAVERSAL (8,3).
This shows the status for:
- STUN
- TURN
- ICE
Media
To check priorities of audio codecs and DTMF signalling.

Select MENU > STATUS > MEDIA (8,4).
This shows the status for:
- CODEC PRIORITY
- VAD
- DTMF SIGNALLING
- SECURITY RTP
- SECURE SIGNALLING
Time
To check time servers and time zones.

Select MENU > STATUS > TIME (8,5).
This shows the status for:
- NTP
- NTP SERVER
- TIMEZONE
Equipment
To check the phone’s serial number and software version.

Select MENU > STATUS > DEVICE (8,6).
This shows the status for:
- OmniTouch 4135 IP (software version and date)
- SERIAL NUMBER
- MAC ADDRESS