9
To prevent interference caused by radio signals, place the Cat7 Router at least
one metre away from phones and other electrical devices.
2.3
In areas with poor signal reception, connect external antennae to the two ports
labelled 'MAIN and DIV' to improve signal reception.
Before installing the external antennae, ensure that your Cat7 Router is powered
off and disconnected from the power outlet.
The external antennae must be installed by a qualified technician.
Use antennae supplied by device manufacturer only.
Open the cover here
and install the LTE
external antennae
2.4 How to connect in Wi-Fi mode
Step 1: Enabling Wi-Fi on your Cat7 Router.
When the Wi-Fi indicator is solid blue, Wi-Fi is enabled.
Step 2: Recording the SSID and Wi-Fi Key.
The default SSID and Wi-Fi key are printed on the device label, situated on the
underside of your Cat7 Router.
To prevent unauthorised parties from accessing your Wi-Fi network, it is
recommended that you change the SSID and Wi-Fi key from time to time. For
more information, please refer to the User Guide which can be accessed via the
Web User Interface.
To Next Page
Loading...
Need help?
General
