19
5.5.3 WPS
The Wi-Fi Protected Setup (WPS) is a standard used to set up wireless connections
in an easy way.
In Personal Information Number (PIN) mode, you can connect a client to LinkHub
WiFi by simply entering the client’s PIN on the LinkHub ‘s web management
page. You can then access the Internet through LinkHub.
In Push Button Configuration (PBC) mode, you can connect a client to the
LinkHub WiFi simply by pushing the WPS button. Your router will receive an
access request from the client within 2 minutes.
5.6 Security
5.6.1
1) When Micro SIM PIN is disabled, click
.
2) Enter a Micro SIM PIN that is 4-8 digits long.
3) Click Apply.
1) When Micro SIM PIN is enabled, click
.
2) Enter the current SIM PIN.
3) Click Apply.
1) When Micro SIM PIN is enabled, click .
2) Enter the old Micro SIM PIN and confirm the new Micro SIM PIN.
3) Click Apply.
Note: When a Micro SIM PIN is entered incorrectly 3 times, a PUK code is
required. You can obtain this by calling customer services on 150 using your
Micro SIM.
To Next Page
Loading...
Need help?
General
