18
DHCP Server will automatically assign IP addresses to devices in the network.
DHCP Server is disabled by default.
DHCP: If DHCP server is enabled, the Linkhub allocates IP addresses to clients
connected to it.
If DHCP server is disabled, the Linkhub does not allocate IP addresses to clients
connected to it and IP addresses must be entered from each client.
5.5 Wi-Fi
5.5.1 Basic
• SSID: This is the name of the Wi-Fi network and is used to identify your Wi-
Fi network. The SSID can be between 1 and 32 characters long.
• SSID Broadcast: This is enabled by default.
Note: If you do choose to disable this, the SSID will no longer be displayed
and will need to be entered manually.
• Security: You can choose the security mode, available options are Disable,
WEP, WPA, WPA2, or WPA/WPA2.
• Encryption: This is set to Auto by default, available options are TKIP, AES,
or Auto.
• Password: You can check your Wi-Fi key here.
5.5.2 Advanced
• Different regions use different channels (Channel 1-11 in FCC
(US) / IC (Canada); Channel 1-13 in ETSI (Europe); Channel 1-13 in MKK
(Japan)).
• 802.11 Mode: You can select from the available options via the drop-down
menu. For 2.4GHz, this is set to 802.11b/g/n by default. For 5GHz, this is
set to 802.11a/ac by default.
• AP isolation: You can enable or disable this function.
• You can select from the available options via the drop-down
menu. This is set to Auto by default.
To Next Page
Loading...
Need help?
General
