21
5.6.7 DMZ
If external users cannot access certain network services provided by the LAN,
you can enable DMZ and set a new Host IP address. Click to enable it. Enter an
appropriate Host IP address and then click Apply.
5.6.8 UPnP
Universal Plug and Play (UPnP) is a set of networking protocols that allows devices
connected to your Cat7 Router to discover each other and establish functional
network services for data sharing, communications, and entertainment. You may
enable or disable UPnP. This function is disabled by default.
5.6.9
Port Forwarding enables external computers to access to WWW, FTP, or other
service provided by the LAN.
5.7 QoS
Quality of Server (QoS) is an advanced feature that prioritises internet traffic for
applications, online gaming, Ethernet LAN ports, or specified MAC addresses
to minimise the impact of busy bandwidth. Enable QoS, set your uplink and
download limits, and click Apply.
6. System
6.1 Device info
You can view device information here, including IMEI, software version, and
MAC address.
6.2
Click to reboot the device. Click to restore factory default settings.
You also can use the reset button on your Cat7 router.
6.3 Update
Online updates:
To Next Page
Loading...
Need help?
General
