200 Series Tooling Alcoa Fastening Systems
2
EC Declaration of Conformity
Manufacturer:
Alcoa Fastening Systems, Industrial Products Group, 1 Corporate Drive, Kingston, NY,
12401, USA
Description of Machinery:
Model number 200 Pneudraulic Installation Tool
Relevant provisions complied with:
Council Directive related to Machinery (98/37/EC)
British Standard related to Hand-Held, Non-Electric Power Tools (EN 792-1:2000) - Safety
Requirements, Part 1, Assembly power tools for non-threaded mechanical
European Representative:
Rob Pattenden, Huck International, Ltd. Unit C Stafford Park 7, Telford Shropshire TF3 3BQ,
England, United Kingdom
Authorized Signature/date:
I, the undersigned, do hereby declare that the equipment specified above conforms to the
above Directive(s) and Standard(s).
Signature:
Full Name: Larry M. Krieg
Position: Engineering Manager
Installation Systems Division
Place: Kingston, New York, USA
Date: July, 2009
Test data to support the above information is on file at Alcoa Fastening Systems, Industrial Products Group, Kingston
Operations, Kingston, NY, USA.
Declared dual number noise emission values in accordance with ISO 4871
A weighted sound power level, LWA: 100.2 dB (reference 1 pW)
Uncertainty, KWA: 3 dB
A weighted emission sound pressure level at the work station, LpA: 89.2 dB (reference 20 µPa)
Uncertainty, KpA: 3 dB
C-weighted peak emission sound pressure level, LpC, peak: 106.5 dB (reference 20 µPa)
Uncertainty, KpC: 3 dB
Values determined according to noise test code ISO 15744, using as basic standards ISO 3744 and ISO 11203. The sum of
a measured noise emission value and its associated uncertainty represents an upper boundary of the range of values which
is likely to occur in measurements.
Declared vibration emission values in accordance with EN 12096
Measured Vibrations emission value, a:
0.66 m/s
2
Uncertainty, K:
0.075 m/s
2
Values measured and determined according to ISO 8662-1, ISO 5349-2, and EN 1033
To Next Page
Loading...