REF: WM4 User Manual V7.docx Page 31 © Alcolizer Technology
12 Email
12.1 Email Settings
The WM4 is equipped for forwarding email notifications of status and logs. To configure the
email function, perform the following steps:
a. Establish an internet connection via the Ethernet cable. This step is not
required if the instrument has a GSM modem.
b. Connect a keyboard/mouse and access the User Menu in accordance with the
procedures at paragraph 7.1.
c. From the User Menu, access the email configuration screen by scrolling down
to Email and pressing space bar.
d. The email screen has two tabs: Settings and Reports.
12.1.1 Settings – Mail template
The Mail Template panel allows configuration of the format and recipients of emails sent
from the instrument.
• Default Recipients: A list of email recipients for emails produced by the instrument. e.g.
someone@bigmine.com.au. Add additional recipients as required separating each with a
space.
• Subject Prefix: Text to be prepended to the subject line of emails produced by the
instrument. It is also possible to use text replacement allowing real data to be inserted into the
text when the email is sent.
• Email Footer: Text to be appended to the body of emails produced by the instrument. It is
also possible to use text replacement allowing real data to be inserted into the text when the
email is sent.
To Next Page
Loading...
