Alcolizer WM4 - Specifications

REF: WM4 User Manual V7.docx Page 6 © Alcolizer Technology
2.2 Accessories
The Wall Mount 4 has available the accessories below but not limited to:
• Alert System (LED Strobe and Buzzer),
• Card Reader,
• iPad Connectivity, (using Wifi connection router)
• Printer,
• Wiegand.
Some accessories require specific installation and operating instructions. Please, contact
your Alcolizer Technology representative for further advice.
2.3 Specifications
Item
Specification
Dimensions
560mm (H) x 390mm (W) x 190mm (D)
Weight
18kg
Power
100-240V ∿50/60Hz 75W
Housing
Steel construction
Sensor
Alcohol specific electrochemical fuel cell
Response Time
Within 3-5 seconds for a 0.100g/100ml BAC reading
Display - Type
25cm (10”) colour graphics LCD
Operating Temp
0 to 50°c
Measurement
Display
4 Digits (x.xxx g/100ml)
Detection Range
0.000 - 0.500 g/100ml
Accuracy
Absolute accuracy to better than +/- 0.005 g/100ml (BAC)
Sample volume
1.2 Litres
Calibration
Daily self-calibration for 12 months (internal certified gas)
Warranty
24 months
Certifications
AS3547 – 1997: Breath alcohol testing devices for personal use,
AS/NZS 60335.1 – 2011: Household and similar electrical
appliances - Safety - General requirements,
EMC: Conducted & Radiated emissions