To Next PageTo Next Page
Need help?Do you have a question about the Alcolizer le5 and is the answer not in the manual?
General| Brand | Alcolizer |
|---|---|
| Model | le5 |
| Category | Test Equipment |
| Language | English |
Lists all the components included with the LE5 handheld instrument.
Details the physical components and user interface of the LE5 instrument.
Describes the functions and information displayed on the instrument's screen.
Explains the location and function of the mouthpiece fitting on the instrument.
Describes the function of the Up and Down buttons for menu navigation.
Provides crucial information and precautions for accurate breath test analysis.
Explains the different testing methods available: Mouthpiece, Passive Standard, Passive Only.
Describes the types of mouthpieces available for use with the LE5 instrument.
Details the procedure for charging the LE5 instrument's Li-ION battery.
Step-by-step guide on how to power on the LE5 alcohol tester.
Instructions for attaching and preparing the mouthpiece for a breath test.
Guides the user through the process of collecting a breath sample using a mouthpiece.
Describes how to perform non-invasive breath tests without a mouthpiece.
How to cancel an ongoing breath test on the instrument.
Procedure for recording a subject's refusal to take a breath test.
Steps to adjust the instrument's date and time settings.
How to configure specific test or donor questions displayed during testing.
Steps to enable or disable the GPS function in the User Menu.
Instructions for enabling and setting the tester's identification code.
Enables access to stored records on the instrument.
Guides on how to access and navigate through stored test records.
Procedure for acquiring GPS satellite signals for location tracking.
Details the configuration options for GPS modes (Mobile and Static).
Steps to establish a Bluetooth connection with a printer or PC.
Procedures for pairing and connecting the LE5 to a Bluetooth printer.
Instructions for installing the necessary printer driver.
Configures automatic printing of test results via Bluetooth.
Guide to setting the correct PIN for Bluetooth printer pairing.
How to connect the LE5 to a serial instrument (PC) via Bluetooth.
Configures automatic sending of test results via Bluetooth to a PC.
How to adjust the colour thresholds for different reading ranges.
Alerts for upcoming calibration requirements and instrument locking.
Steps for removing and replacing the instrument's sample module.
Guide to downloading and installing the AlcoCONNECT software.
How to connect the LE5 to a computer and use the AlcoCONNECT software.
Describes the layout and icons within the Event Log window.
How to filter data by enabling/disabling record types in Log Settings.
Instructions for saving event logs for future analysis.
