Alcolizer le5 - Enable ID Code

REF: LE5 Alcohol Tester User Manual V16.docx Page 32 © Alcolizer Technology
Uncontrolled when printed
 The Area Code is now set
Figure 49 - Area Code Set
 Press the down button until

Back is displayed
 Press the test key to return to the press to test screen.
6.3 Enable ID Code
ID Code is used to identify the ID Code of the Tester.
 Press the down button and scroll to ID Code (Refer Figure 50).
Figure 50 – ID Code
 Press the test key, the cursor will move below the first digit
 Use the up/down buttons to advance the digit to the required number
 When the correct number is displayed, press the test key. The number will be
set, and the cursor will move the next digit.
 Repeat the above step until all the number required are displayed (Refer Figure 51).