REF: LE5 Alcohol Tester User Manual V16.docx Page 40 © Alcolizer Technology
Uncontrolled when printed
As each satellite is acquired, the respective yellow bar and satellite number will be displayed, and its
location will be displayed on the map. Once enough satellites are acquired for an accurate position,
the Latitude and Longitude will be displayed (Refer 68)
Figure 68 - GPS Acquisition
Once the GPS location is acquired, it will be visible on the menu screen (Refer Figure 69).
Figure 69 - GPS Position on Menu Screen
7.2 GPS Mode Configuration
Refer to Table 1 for GPS mode configuration.
Mobile Static
Positive Tests Positive Tests
All Tests All Tests
Threshold Threshold
Table 1- GPS Mode Configurations
7.3 Static GPS Mode Operations
The Static GPS Mode Operations (if enabled) will initiate a once only GPS position fix before a
Standard Active Breath Test. The same GPS position fix or Location Unknown will then be logged
against all breath test readings performed thereafter while ever the instrument remains on (Refer
Figure 70).
Whatever configuration is chosen on Static Mode the instrument will always acquire the location
prior to the first test. Then you have a choice of the following three options:
Positive Tests which will record the location only on positive readings,
To Next Page
Loading...
