Alcolizer WM4 - Calibration

REF: WM4 User Manual V7.docx Page 41 © Alcolizer Technology
My instrument is displaying “Liquid
Detected”.
It is possible that liquid has been blown into the
sample port. Ensure liquid is not present and try
again. If the problem persists, allow a suitable time
period for the liquid to clear itself (anywhere up to
48hrs), or refer to section 5.2 of this manual.
If the problem persists, contact Alcolizer on
1300 789 908.
18 Calibration
The WM4 self-calibrates every 24 hours for the duration of its service life, and requires no
user calibration.
Liquid Detected