Alcolock LR - INSTALLATION; MAINTENANCE; OPERATING TEMPERATURE; BATTERY VOLTAGE

INSTRUCTION MANUAL 4
INSTALLATION
ALCOLOCK Service Centres are conveniently located,
and the ALCOLOCK LR device may be installed while you
wait by a qualied installer in accordance with jurisdictional
regulations. Installation must be done at an ALCOLOCK
Service Centre. You will receive full training on site by
qualied technicians.
MAINTENANCE
You must visit the Service Centre 30 days after installation.
You must also visit at regular intervals thereafter or at intervals
specied in the regulations, for maintenance and monitoring.
Monitoring appointments typically take less than 20 minutes.
Consult your Compliance Guide for more information.
During eld use, handle the ALCOLOCK LR device with care
and keep it clean and dry at all times. Clean the Handset with
a damp cloth and mild soap. Do not use abrasive cleaners or
solvents.
OPERATING TEMPERATURE
The ambient operational temperature range is -45 °C and
85 °C.
NOTE: The Handset will warm up in about 15 seconds
at 20 °C; about 1 minute at 0 °C and up to 3 minutes at
extreme cold temperatures (-20 °C) to be operational.
It would be benecial to keep the Handset in a warm
environment prior to use.
BATTERY VOLTAGE
The vehicle battery supplies power to the ECU, which in turn
powers the Handset.
The ALCOLOCK LR device operates within the vehicle battery
range of 9 to 36V.