FITTED EQUIPMENT
163
Operating instructions for
softrollo blinds
Hold the operating aluminium bar in the middle
and raise or lower the blind and flyscreen
independently, operating together will require
excessive force in operation.
Care instructions: Clean the blind only with
a damp sponge. Clean on a regular basis to
avoid dirt particle build up as this can damage
the blind material.
Use only water or with mild suds or a vacuum
cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Maintenance
If operation of the soft Rollo blind is
exceptionally stiff, it is possible to spray the
guide - legs (left and right) with a Teflon - spray.
This will ease both the operation of the blind
and avoid any interruption/malfunction from
deposits in the guide legs which may affect the
operation.
Fig. D
Fig. E
Fig. F
Fig. G
BEDDING/BLINDS
To Next Page
Loading...
