aldes T.Flow Hygro+ - Page 34

69
EN
T.Flow
®
Hygro+ /T.Flow
®
Nano (Ventilation)
Thermodynamic water heater using exhaust air
Supplier brand Aldes Aldes
Description
B200-FAN T.Flow
®
Hygro+ /
B200-FAN T.Flow
®
Hygro+
connected
B100-FAN T.Flow
®
Nano /
B100-FAN T.Flow
®
Nano
connected
References 11023198 / 11023384 11023394 / 11023396
Energy class** - Average climate B B
Average climate - SEC - Specific energy consumption
(kWh/m²/year)
-26.1 -26.2
Cold climate - SEC - Specific energy consumption
(kWh/m²/year)
-53.30 -53.30
Warm climate - SEC - Specific energy consumption
(kWh/m²/year)
-10.70 -10.70
Type of airflow Unidirectionnal Ventilation Unit Unidirectionnal Ventilation Unit
Declared type Residential Ventilation Unit Residential Ventilation Unit
Type of motor installed or planned Variable speed Variable speed
Type of heat recovery system NA NA
Thermal output of heat recovery (%) NA NA
Maximum URV airflow (m
3
/h) 318 301
Electric power absorbed at Qmax (W) 56.9 53.5
LwA - Acoustic power level (dB) 45 45
Reference airflow (m
3
/s) 0.06 0.06
Difference in reference pressure (Pa) 136 124
SPI (W/m
3
/h) 0.16 0.16
Control factor (%) 0.65 0.65
Type of control system LDC LDC
Maximum declared external leakage rate under negative pressure for UVU and
BVU (%)
2.5 2.6
Annual electricity consumption (kWh electricity/year) 87 84
Average climate - AHS - Annual heating savings
(kWh primary energy/year)
2830 2830
Warm climate - AHS - Annual heating savings
(kWh primary energy/year)
1280 1280
Cold climate - AHS - Annual heating savings
(kWh primary energy/year)
5536 5536
**In accordance with eco-design regulation 1253/2014 and energy labelling regulation 1254/2014
**