ALDI Crane SKI-Watch - Page 31

31 Modes of the Ski watch
31
Go back to the menu and leave the Setup mode: press the
“MODE” button
GPS update for the time
 Select the menu point "Setup"  "Clock”  “GPS Sync".
 Now select "ON" or "OFF". "ON" is preset, which means
that the time and date will be set automatically when there
is satellite reception.
Information: Please note, that the GPS Signal is transmitted
in Greenwich Mean-Time (GMT), it can be necessary to set
another time zone.
For example, in Melbourne:
In the winter time GMT + 11
In the summer time GMT + 10
Set time zone
 Select the menu point "Setup"  "Clock"  "GPS Sync"
 "On"  “Time Zone”.
 Now, you can either set a time zone from -12:00 to
+12:00, or select "Auto". If you select "Auto”, the Ski-
watch will try to calculate the time zone based on the
determined longitude. If this does not function correctly,
set the time zone in hours (e.g. + 01:00).