50 Energy saving operation
50
If the memory of the watch is full and no more recordings can
be made, then the time recording for training in the training
mode can no longer be started. This means, the “ST./STP.”
button can no longer be pressed.
However, before the memory is full, "memory full!" will
appear on the display of the Ski watch. If the training time or
lap time is full (99h), then equally no further recordings can be
made.
8 Energy saving operation
The Ski watch has an energy saving operation mode. Thereby,
the display is switched off to extend the life of the
rechargeable battery.
To activate energy saving operation, press the "LAP/RE."
button for approx. 5 seconds, in the time mode. The display
will be turned off. The settings in the various modes will NOT
be lost in doing so.
To Next Page
Loading...
