ALDI Crane SKI-Watch - Page 46

46 Modes of the Ski watch
46
Note: In Interval Mode: The training phases are recorded as
consecutive laps.
Note: Comprehensive data will be available for review via the
GPS Master once the data is uploaded.
Delete training data
If you delete training data from the watch before you
download to the computer all information will be lost.
Alternatively you can “fast delete” the data from the watch via
the computer software.
Press the “MODE” button until you enter the “History Mode”
 “Erase All”  Yes/No  If you select yes, “
“ will
appear and you return to the History Options Menu.
Review total training data according to training modes
Press the “MODE” button until you enter the “History Mode”
 “Totals”  “Skiing”, “Running”, “Cycling” or “Interval”.
Press “ST./STP.” or “LAP/RE.” to select the desired Total
Training Data. Then press “VIEW”. Press “VIEW” again to
read the calculated training data:
TOTAL DISTANCE, TOTAL TIME, TOTAL CALORIES
Press “Totals”  “Reset all” for deleting all recorded total
training data saved in “Totals”.  Yes/No  If you select
yes, “
“ will appear and you return to the History Options
Menu. The single training data are not deleted.
Press the “MODE” button repeatedly to exit the “History
Mode.”