- Carefully check the surface on which you wish to use the
lawnmower and remove any objects that could damage the
lawnmower and the cutting tools, fasteners or the entire
cutting unit in particular.
-
Ensure that the cutting blades do not come into contact with
the ground on uneven surfaces.
- Switch the lawnmower off as soon as you have finished
working.
- Stop the cutting blade if the lawnmower has to be tilted to be
transported over surfaces other than grass and when moving
the lawnmower to and from the surface to be mown.
- If the lawnmower starts to vibrate excessively, a careful
inspection is required. Stop the lawnmower immediately and
remove the safety key. Ensure that all nuts, bolts and screws
are firmly tightened and look for damage. Repair the
damaged parts as required.
- Check the lawnmower for damage if it has come into contact
with foreign objects.
- Never lock the lock bar and the safety switch.
- Always have damage repaired before using the lawnmower
again.
Safety
13
To Next Page
Loading...
Need help?
General
