Before first use
Check the device and scope of delivery
WARNING!
Danger of suffocation!
Children may become tangled up in the packaging film when
playing with it and suffocate.
-
Do not let children play with the packaging film.
NOTE!
Risk of damage!
If opening the packaging with a sharp knife or other pointed
objects, careless handling can damage the device.
- Therefore, be very careful when opening.
1. With both hands, lift the device out of the packaging.
2. Check that the delivery is complete (see chapter “Included in delivery/Device
parts”).
3. Inspect the device and individual parts for damage. Do not operate a damaged
device; instead, contact the manufacturer via the service centre listed on the
warranty card.
Assembling the lawnmower
1. Open the safety cover
and pull out the safety key
(see Fig. 1).
The security key must be pushed together slightly to remove it.
2. Close the safety cover again.
3. Push the washers
, the quick-release lever
from the outside through the
holes in the guide bar frame
and fold the guide bar frame upwards (see Fig.
2)
4. Place the guide bar on the guide bar frame in such a way that the holes are
aligned at the corresponding height (see Fig. 3).
5. Push the washers
onto the threads of the quick-release levers
.
Before
first use
15
To Next Page
Loading...
Need help?
General
