4. Use a screwdriver to unscrew the fastening screw
and remove it together
with the washer (see Fig. 6).
5. Remove the cutting blade
.
6. Place a new cutting blade on the drive plate .
7. Place the washer and fastening screw back onto the cutting blade and tighten
them.
Before using again, ensure that the new cutting blade is attached correctly and
is tight.
Devices with inserted or enclosed rechargeable batteries as well as
individual rechargeable batteries may only be shipped in exceptional
cases and after prior consultation with the service department on the
telephone number indicated on the guarantee card.
Transport and storage
WARNING!
Risk of injury and damage.
Improper transport of the device and the battery can cause
injuries and damage.
- If you want to transport the device by car, it must be safely
positioned and tied down.
- To protect the battery from deep discharge, it should be fully
charged before longer storage periods.
- If you want to transport or store the battery, stick a strip of
adhesive onto the contacts or pack it in a plastic bag or a box.
Cleaning and maintenance
21
To Next Page
Loading...
Need help?
General
