35
4.3 MENU-OPERATED FUNCTIONES:
General:
• You open the menu by pressing the MENU button.
• Use or to select the desired menu and then press
the SELECT button.
• Use or to select the desired option and then
press the SELECT button.
• Finally press the SELECT button to save your setting
and press the VIEW button to close the menu (or wait
until the parent unit closes the menu automatically
after approximately 15 seconds). You can also use the
or button to select the option and then press
the SELECT button to close the menu.
Brightness:
1. Press the MENU button and use the or button to
scroll to the option.
2. Press the SELECT button and use the or button
to decrease or increase the brightness.
3. Press the SELECT button to save your setting and
press the VIEW button to close the menu.
See chapter 4.4 about automatically reducing the
brightness when the parent unit is powered only by
the battery.
VOX (automatically switching on/o):
When the baby is sleeping quietly and the baby unit is not
detecting any sound, you may have the display and sound
oftheparentunitswitchoautomaticallyandswitchback
on again as soon as the baby starts making noise.
You may set the sound level for switching the display and
sound back on as follows:
1. Press the MENU button and use the or button to
scroll to the option.
2. Press the SELECT button and use the or button
to decrease or increase the sensitivity.
• 1 to 4 blue bars: the more blue bars, the higher the
sensitivity. Some trial and error may be required to
ndthemostsuitablesetting.
• 5 blue bars: the VOX function is disabled and the
display and sound are always enabled
3. Press the SELECT button to save your setting and
press the VIEW button to close the menu.
To Next Page
Loading...
Need help?
General
