43
5.9 PROBLEMS:
no image, no sound:
– aretheparentunitandbabyunitswitchedo?
(battery charged, batteries full?)
– is the parent unit within range of the baby unit?
– isthebabyunitdisabledundertheinuenceof
silence? (see chapter 4.3, item VOX)
– isthevolumeattheparentunitsetto0(o)?
• If the above is all in order, remove the adapters from
the wall sockets, take the rechargeable battery out
of the parent unit, wait at least one minute and then
reconnect everything. Now, switch the parent unit and
baby unit back on.
• If you still receive no images or sound, please contact
the customer service of Alecto via internet www.alecto.nl
Display at low intensity:
– The parent unit is powered by the built-in battery
and to save battery energy the display intensity is
lowered to 10% after 10 minutes. Press a random
button on the parent unit to restore the normal
brightness or connect the power adaptor. See also
chapter 4.4.
To Next Page
Loading...
