38
Lullabies and natural sounds:
The parent unit can be used to play lullabies or natural
sounds through the baby unit. You can also set for how
long these lullabies or natural sounds must be played.
Attention, separate steps must be followed for setting the
playback duration and for setting which song or sound
must be played.
Playback duration setup:
1. Press the MENU button and use the or button to
scroll to the option.
2. Press the SELECT button and use the or button
to select the option.
3. Press the SELECT button and use the or button
to select the desired playback duration. You may
choose from 15, 30, 45 or 60 minutes (a black arrow
indicates the current duration setting).
4. Press the SELECT button to save your setting and
press the VIEW button to close the menu.
Selecting a lullaby or natural sound:
1. Press the MENU button and use the or button to
scroll to the option.
2. Press the SELECT button and use the or button
to select the option for the natural sounds or the
option for the lullabies.
You may choose from the following natural sounds:
• White noise
• Crickets
• Waves
• Heartbeat
Thelullabiesoptionoersachoiceof5songsoryou
may select the option to play all lullabies continu-
ously one after the other.
During setup the baby unit plays the selected song or
sound.
3. Press the SELECTbuttontoconrmplaybackand
press the VIEW button to close the menu.
To stop playback earlier:
Playback of the sounds or songs stops automatically after
the duration you’re set. You may stop playback earlier as
follows:
To Next Page
Loading...
Need help?
General
